Additive Device
Micro-nano1 | Prepare the model and transfer it to the device. Import the model into the software. After ensuring that there is no problem with the model, slice the model and transfer it to the device. |
2 | Add printing material and printing agent, put the printing material into the printing material cylinder, and put the printing agent into the printing agent cylinder to start printing. |
3 |
Start printing
Press the "start printing" button to open
|
4 | Take out the printing model. After the model is printed successfully, wait for 30 minutes to cure the model, and then clean the model with a brush. |
Software micro is a 3D printing software developed independently from kernel to appearance. The operation is simple, easy to learn and understand, and the operation is smooth. |
Manufacturing needs a lot of 3D printing products, because 3D printing is much better than traditional manufacturing in terms of cost, speed and accuracy. 3D printing technology itself is very suitable for large-scale production, so the manufacturing industry can bring many benefits by using 3D technology, and even quality control is no longer a problem. With 3D printing, the designer's drawings can be quickly turned into solid things, and then open the mold for large-scale production. The significance of 3D printing technology lies in the saving of time and cost in the design process. |
1 | Prepare the model and pass it in to the device
After importing the model into the software to ensure that there is no problem with the model,
Slice the model and pass it in to the device.
|
Software micro is a 3D printing software developed independently from kernel to appearance.
The operation is simple, easy to learn and understand, and the operation is smooth.
|
|
2 |
Add printing materials and printing agents
Put the printing material into the printing material cylinder
Put the printing agent into the printing agent cylinder and start printing.
|
3 |
Start printing
Press the "start printing" button to open
|
4 |
Take out the print model
After the model is printed successfully, wait 30 minutes,
After curing the model, clean out the model with a brush.
|